HMAS Anzac (D59)


HMAS Anzac during her acceptance trials in 1951
Career (Australia)
Namesake: The Australian and New Zealand Army Corps
Builder: Williamstown Naval Dockyard
Laid down: 23 September 1946
Launched: 20 August 1948
Commissioned: 14 March 1951
Decommissioned: 4 October 1974
Reclassified: Training ship (April 1963)
Motto: "United We Stand"
Honours and
awards:
Battle honours:
Korea 1951–53
Malaya 1956
Fate: Sold for scrap, 24 November 1975
General characteristics
Class and type: Battle class destroyer
Displacement: 2,436 tons (as destroyer)
3,450 tons (as training ship)
Length: 379 ft (116 m) overall
355 ft (108 m) between perpendiculars
Beam: 41 ft (12 m)
Draught: 21 ft 11.5 in (6.693 m)
Propulsion: 2 Admiralty 3-drum boilers, Parsons geared turbines, 50,000 SHP, 2 shafts
Speed: 31 knots (57 km/h; 36 mph)
Complement: 320 as destroyer
169 + 109 trainees as training ship
Armament: 4 x 4.5-inch (110 mm) Mark VI guns (2 twin turrets)
12 x Bofors 40 mm guns (3 twin mountings, 6 single mountings)
1 x Squid anti-submarine mortar
2 x 5-tube 21-inch (530 mm) Pentad torpedo tubes

HMAS Anzac (D59) was a Battle class destroyer of the Royal Australian Navy (RAN). Named after the Australian and New Zealand Army Corps, the destroyer was commissioned in 1951. The ship served on two tours of duty during the Korean War, and attempts to distinguish herself from British ships led to the practice of red kangaroo symbols on Australian warships. During 1956, Anzac served during the Malayan Emergency. In 1960, a malfunction in the destroyer's gun direction equipment caused Anzac to fire directly on sister ship HMAS Tobruk during a gunnery exercise, with Tobruk left unrepairable. In 1963, the destroyer was reclassified as a training vessel. Anzac remained in service until 1974, and was sold for breaking a year later.

Contents

Design and construction

Anzac was built to the British Battle class destroyer design.[1] The ship had a displacement of 2,436 tons as designed, although this displacement increased to 3,450 tons after her 1963 reclassification as a training ship.[1] She was 379 feet (116 m) long overall and 355 feet (108 m) long between perpendiculars, with a beam of 41 feet (12 m), and a draught of 21 feet 11.5 inches (6.693 m).[1] Propulsion was provided by two Admiralty 3-drum boilers supplying steam to Parsons geared turbines; these generated 50,000 shaft horsepower for the destroyer's two propeller shafts.[1] Anzac was designed to reach 31.5 knots (58.3 km/h; 36.2 mph), but could usually only reach 31 knots (57 km/h; 36 mph).[1] The ship's company originally consisted of 320 personnel, but after conversion into a training ship, this changed to 169 ship's company plus 109 trainees.[1]

The main armament of Anzac consisted of four 4.5-inch Mark VI guns in two twin turrets.[1] This was supplemented by twelve Bofors 40 mm guns for air defence, (three twin mountings and six single mountings, a Squid anti-submarine mortar, and two sets of 5-tube 21-inch Pentad torpedo launchers.[1]

Anzac was laid down by the Williamstown Naval Dockyard at Melbourne, Victoria on 23 September 1946, and was launched on 20 August 1948 by the wife of John Augustine Collins, the Chief of the Naval Staff.[1] Anzac was commissioned as a ship of the RAN on 14 March 1951.[1] The ship was originally to be named Matapan, for the Battle of Cape Matapan, but this was changed to Anzac, for the Australian and New Zealand Army Corps prior to launch.[2]

Operational history

At the end of July 1951, Anzac left Australian waters for her first deployment to the Korean War.[1] Arriving in Japan on 14 August, the destroyer was assigned as an escort to the United States Navy (USN) escort carrier USS Sicily and operated off the west coast of Korea.[3] Sicily was replaced by the Royal Navy (RN) light carrier HMS Glory on 2 September, and on 6 September, Anzac was ordered to shell a suspected communist position near Haeju; firing in anger for the first time at 18:15 hours.[4] During 12–26 September, Anzac led US Ships Thompson and Naifeh in a blockade of Wosan, before returning to Japanese waters at the end of the month.[4]

Her first Korean tour completed, Anzac escorted HMS Glory to Sydney, where they arrived on 20 October.[4] The destroyer then proceeded to Melbourne for a refit, which lasted until the end of 1951, and remained in Australian waters until deploying with the cruiser HMAS Australia in April 1952 for a training cruise through Maritime Southeast Asia.[4] After undergoing another, brief refit, Anzac rejoined the Korean War effort, and spent most of September patrolling the west coast of Korea, then joined the escort screen of the RN light carrier Ocean at the start of October.[4] After a short break in Kure, the destroyer was assigned to patrols and shore bombardments on the west coast until 19 December, when she relieved HMCS Haida and assumed responsibility for the defence of Yongdo Island.[4] Herself relieved on 3 January 1953, Anzac returned to the west coast of Korea, where she resumed patrols and bombardments.[4] Apart from a brief stint on the east coast shelling supply lines and a visit to Tokyo to celebreate the coronation of Queen Elizabeth II, Anzac operated off the west coast until 13 June; the conclusion of her second Korean tour.[4] Anzac arrived in Sydney on 3 July.[4]

For her two tours, Anzac was awarded the battle honour "Korea 1951–53".[5] During these tours, the ship's company often found themselves mistaken for British warships, as the RAN ensign at the time was identical to the British White Ensign.[4] To counteract this, the executive officer acquired the largest sheet of brass he could find, and had the kangaroo design from the reverse of the Australian penny cut from the sheet, which was then mounted to the top of the mainmast as a 'weathervane'.[6] This method of identification was later adopted across the RAN: all surface ships now bear a red kangaroo symbol on each side of their exhaust funnels or superstructure.

In February 1954, Anzac was assigned as escort ship during the visit of members of the British Royal Family.[7]

Anzac operated during the Malayan Emergency. Following an overhaul of the RAN battle honours system, the destroyer was retroactively awarded a second honour to recognise this: "Malaya 1956".[5][8]

In September 1960, Anzac was performing gunnery exercises with sister ship HMAS Tobruk.[9] A malfunction in Anzac's gun direction equipment negated the deliberate 6° mis-aiming of her guns, with the resulting shell hitting Tobruk and doing enough damage to the destroyer to make repairs uneconomical.[9] Two of Anzac's personnel were charged by the Naval Board,[9] while Tobruk was decommissioned a month later.

During February and March 1963, Anzac again served as escort ship during a visit by members of the Royal Family.[7] In April, the destroyer was refitted and reclassified for use as a training ship.[7]

Decommissioning and fate

Anzac paid off at Sydney on 4 October 1974, after travelling 639,000 nautical miles (1,183,000 km).[7] She was sold for A$41,780 to the Hifirm Corporation Limited of Hong Kong on 26 November 1975, and departed Sydney on 30 December 1975 under tow by the tug Herakuresu.[7]

Citations

  1. ^ a b c d e f g h i j k Cassells, The Destroyers, p. 10
  2. ^ Cassells, The Destroyers, p. 9
  3. ^ Cassells, The Destroyers, pp. 10–11
  4. ^ a b c d e f g h i j Cassells, The Destroyers, p. 11
  5. ^ a b "Royal Australian Navy Ship/Unit Battle Honours". Royal Australian Navy. 1 March 2010. http://www.navy.gov.au/w/images/Units_entitlement_list.pdf. Retrieved 14 March 2010. 
  6. ^ Cassells, The Destroyers, pp. 11–12
  7. ^ a b c d e Cassells, The Destroyers, p. 12
  8. ^ "Navy Marks 109th Birthday With Historic Changes To Battle Honours". Royal Australian Navy. 1 March 2010. http://www.navy.gov.au/Navy_Marks_109th_Birthday_With_Historic_Changes_To_Battle_Honours. Retrieved 14 March 2010. 
  9. ^ a b c Frame, Where fate calls, pp 36–7

References

Further reading

External links